Canadian Manufacturing Malaise: Three Hypotheses
DOI :
https://doi.org/10.11575/sppp.v6i0.42423Résumé
The danger in politicians promoting the idea that “Dutch Disease” is responsible for the decline of the Ontario manufacturing sector is that the suggestion implies that Canada’s manufacturing sector will bounce back if only we could slow down oil sands development, or if the Canadian dollar were to devalue. In reality, evidence suggests that the decline in Ontario manufacturing is the result of long-term structural changes in the economy, independent of the rise of the country’s natural-resource sector and the rising dollar. And the sooner policymakers realize that, and stop blaming the decline in manufacturing on Dutch Disease (which holds that a booming natural-resource sector that drives up our dollar makes our manufacturing exports less competitive) the sooner they can get to work on helping manufacturing-dependent regions transition to the evolving economy. A closer analysis of Canada’s manufacturing sector shows that jobs in that sector have been disappearing across the country since the end of the Second World War, with the sector’s share of employment falling dramatically well before rapid development began to take hold in the oil sands, and back when Canada’s dollar was still worth far less than the American dollar. It is a trend that has been occurring among most of our OECD peers, including the United States, which may be due to the widespread reallocation of production to lower cost countries. But it is also true that Canada’s manufacturing productivity performance in particular has been declining for a generation, with especially poor performance in the last decade, when labour productivity in Canada grew at just a quarter of the U.S. rate. Meanwhile, capital investment that may have improved the competitiveness of Canadian manufacturing has been anemic. Yet there is no particular reason to lament the scaling-down of manufacturing jobs in Ontario. The province remains just as economically important, as a share of national GDP, as it was 30 years ago, and its unemployment rate has remained roughly in line with the Canadian average. Often the manufacturing jobs that disappear soonest are low-skill, low-paying jobs. Indeed, those workers that have remained in the sector have done very well, with the growth in weekly earnings in the Ontario manufacturing sector outpacing the national average. It would be a grave mistake for Ontario’s policy-makers to argue in favour of hampering Canada’s oil sands development in hopes that it might devalue the dollar and revive their province’s shrinking manufacturing base. It would harm the national economy and yet, judging by the evidence, may do nothing to add jobs at Ontario’s factories. Instead, Ontario’s policymakers should accept that those jobs might never return, and instead, focus their energies on finding ways to encourage growth in high-skill, high-paying jobs in other sectors that offer more promise.Téléchargements
Publié-e
Numéro
Rubrique
Licence
The following is the copyright statement of SPPP.
Copyright © <Author name> <year>. This is an open-access paper distributed under the terms of the Creative Commons license CC BY-NC 4.0, which allows non-commercial sharing and redistribution so long as the original author and publisher are credited.
Publication Copyright and Licensing
The following guidelines and information, provided in six sections, are intended for authors (the “Author”) who are invited to write a paper (the “Work”) for The School of Public Policy Publications (the “Publisher”). The rights and responsibilities conveyed in the SPP Author Agreement will only apply once your paper is accepted for publication. At that point in the publication process, you will be asked to download the form and return a signed copy via e-mail to spppublications@ucalgary.ca. Please review the below information to ensure agreement with SPPP policies.
Section 1: Author’s Grant of Rights
In consideration of the Publisher’s agreeing to publish the Work in The School of Public Policy Publications, the Author hereby grants to the Publisher the following:
1.1 The irrevocable, royalty-free right to publish, reproduce, publicly display, publicly perform and distribute the Work in perpetuity throughout the world in all means of expression by any method or media now known or hereafter developed, including electronic format;
1.2 The irrevocable, royalty-free right to use the Author’s name and likeness in association with the Work in published form and in advertising and promotional materials related to the Work; and
1.3 The irrevocable, royalty-free right to license others to do any or all of the above.
Section 2: Prior Publication & Publication by Others
2.1 The Author agrees not to publish the Work, or authorize any third party to publish the Work, either in print or electronically, prior to publication of the Work by the Publisher.
2.2 The Author agrees not to publish the Work in any publication outlet which is substantially similar to The School of Public Policy Publications for a period of six (6) months after publication of the Work in The School of Public Policy Publications. Substantially similar is defined as a non-subscription, open-access publication outlet with a similar mandate/vision and intended audience.
2.3 Should the Author publish or distribute the Work elsewhere at any time or in any alternate format, the Author agrees to contact The School of Public Policy Publications to inform them of the subsequent publication.
2.4 Should the Author publish or distribute the Work elsewhere at any time or in any alternate format, the Author agrees to make reasonable efforts to ensure that any such additional publication cites the publication in The School of Public Policy Publications by author, title, and publisher, through a tagline, author bibliography, or similar means. A sample acknowledgement would be:
“Reprinted with permission from the author. Originally published in the The School of Public Policy Publications, http://www.policyschool.ca/publications/.”
Section 3: Editing and Formatting
The Author authorizes the Publisher to edit the Work and to make such modifications as are technically necessary or desirable to exercise the rights in Section 1 in differing media and formats. The Publisher will make no material modification to the content of the Work without the Author’s consent.
Section 4: Author’s Ownership of Copyright and Reservation of Rights
4.1 Nothing in this agreement constitutes a transfer of the copyright by the Author, and the copyright in the Work is subject to the rights granted by this agreement.
4.2 The Author retains the following rights, including but not limited to, the right:
4.2.1 To reproduce and distribute the Work, and to authorize others to reproduce and distribute the Work, in any format;
4.2.2 To post a version of the Work in an institutional repository or the Author’s personal or departmental web page so long as The School of Public Policy Publications is cited as the source of first publication of the Work (see sample acknowledgement above).
4.2.3 To include the Work, in whole or in part, in another work, subject to Section 2 above and provided that The School of Public Policy Publications is cited as the source of first publication of the Work (see sample acknowledgement above).
4.3 The Editors and Editorial Board of The School of Public Policy Publications requires authors to publish the Work under a Creative Commons Attribution-NonCommercial 4.0 International licence (CC BY-NC 4.0). This license allows others to distribute, remix, tweak, and build upon the Work for noncommercial purposes, and ensures the Author is credited for the original creation. This onward licensing is subject to section 2.4 of this agreement, which further ensures that the original publisher is credited.
Section 5: Author’s Warranties and Undertakings
The Author warrants that:
5.1 The Author is the sole author of the Work, or if a joint author, the Author has identified within the Work the other authors, and holds the copyright, either solely or jointly, and has the power to convey the rights granted in this agreement.
5.2 The Work has not previously been published, in whole or in part, except as follows:
5.3 Any textual, graphic or multimedia material included in the Work that is the property or work of another is either explicitly identified by source and cited in the Work or is otherwise identified as follows:
5.4 To the best of the Author’s knowledge, the Work does not contain matter that is obscene, libelous, or defamatory; it does not violate another’s civil right, right of privacy, right of publicity, or other legal right; and it is otherwise not unlawful.
5.5 To the best of the Author’s knowledge, the Work does not infringe the copyright or other intellectual property or literary rights of another.
5.6 The Author will indemnify and hold Publisher harmless against loss, damages, expenses, awards, and judgments arising from breach of any such warranties.
Section 6: The Reuse of Third-Party Works
The Publisher requires that the Author determine, prior to publication, whether it is necessary to obtain permissions from any third party who holds rights with respect to any photographs, illustrations, drawings, text, or any other material (“third-party work”) to be published with or in connection with your Work. Copyright permission will not be necessary if the use is determined to be fair dealing, if the work is in the public domain, or if the rights-holder has granted a Creative Commons or other licence. If either the Author or Publisher determines for any reason that permission is required to include any thirdparty work, the Author will obtain written permission from the rightsholder.