Productivity Growth in Canada: What is Going On?
DOI:
https://doi.org/10.55016/ojs/sppp.v17i1.80080Abstract
Canada is seriously lagging in productivity growth, which is the only means countries have to raise their citizens’ standard of living. Overall, Canadian business productivity fell by 0.6 per cent over the past five years. This is in sharp contrast to the United States, which enjoyed a 10.1 per cent increase over the same period. This trend of faster U.S. growth has held true since the mid-1990s, with Canadian productivity rising by about half as much as the American rate. In fact, Canada trails not only the U.S. but all advanced countries in Northern and Western Europe, as well as Australia.
Going by sector, Canada’s recent productivity declines have been concentrated in holding companies, transportation and warehousing, construction and manufacturing. The latter three categories are responsible for two-thirds of the decline in productivity. For transportation and warehousing, the effects of the COVID-19 pandemic on travel are a major contributor. For construction, the decline comes from residential and non-residential work, as opposed to engineering construction. For manufacturing, a significant source is transportation equipment manufacturing, particularly in the automotive sector.
Provincially, Alberta, Saskatchewan and Newfoundland and Labrador have the highest productivity, thanks to the oil and gas industry. B.C., Ontario, Quebec and Manitoba are slightly below the national average while the Maritime provinces have productivity levels 25 to 31 per cent lower than the national average.
However, Ontario and Alberta are responsible for the lion’s share of Canada’s slumping productivity growth, due to their weight in the national economy. Ontario is behind 48 per cent of the decline, while Alberta’s share is 22 per cent.
From 2020–23, Canada’s capital intensity grew only slightly — not much faster than hours worked. This means that investment has not been high enough to boost productivity. Canadian investment fell from 2.1 per cent annually from 1998–2019 to just 0.5 per cent annually between 2020 and 2023. The main culprits are non-residential buildings (such as offices and factories), along with machinery and equipment. Investment in these capital goods decreased by 5.9 per cent annually in the non-residential sector and by 3.1 per cent in machinery and equipment.
The fall in non-residential investment is likely the result of more people working from home. The fall in machinery and equipment is more puzzling. With tight labour markets, companies should want to invest in automation to save on labour costs, but this doesn’t seem to be happening.
Canada has seen essentially no productivity growth in recent years, and much of the decrease is in a few core sectors. The picture is not complete, but since the output of those industries is easy to measure, it suggests that the slowdown is real.
To increase productivity, governments should look at income tax rates, excessive red tape, regulatory harmonization, a lack of competition and barriers to foreign entry into the economy. Governments also need to look at improving their own productivity to avoid crowding out the private sector and to free up resources. There isn’t a one-size-fits-all solution. A broad range of policy options are necessary to solve Canada’s productivity problem.
Downloads
Published
Issue
Section
License
The following is the copyright statement of SPPP.
Copyright © <Author name> <year>. This is an open-access paper distributed under the terms of the Creative Commons license CC BY-NC 4.0, which allows non-commercial sharing and redistribution so long as the original author and publisher are credited.
Publication Copyright and Licensing
The following guidelines and information, provided in six sections, are intended for authors (the “Author”) who are invited to write a paper (the “Work”) for The School of Public Policy Publications (the “Publisher”). The rights and responsibilities conveyed in the SPP Author Agreement will only apply once your paper is accepted for publication. At that point in the publication process, you will be asked to download the form and return a signed copy via e-mail to spppublications@ucalgary.ca. Please review the below information to ensure agreement with SPPP policies.
Section 1: Author’s Grant of Rights
In consideration of the Publisher’s agreeing to publish the Work in The School of Public Policy Publications, the Author hereby grants to the Publisher the following:
1.1 The irrevocable, royalty-free right to publish, reproduce, publicly display, publicly perform and distribute the Work in perpetuity throughout the world in all means of expression by any method or media now known or hereafter developed, including electronic format;
1.2 The irrevocable, royalty-free right to use the Author’s name and likeness in association with the Work in published form and in advertising and promotional materials related to the Work; and
1.3 The irrevocable, royalty-free right to license others to do any or all of the above.
Section 2: Prior Publication & Publication by Others
2.1 The Author agrees not to publish the Work, or authorize any third party to publish the Work, either in print or electronically, prior to publication of the Work by the Publisher.
2.2 The Author agrees not to publish the Work in any publication outlet which is substantially similar to The School of Public Policy Publications for a period of six (6) months after publication of the Work in The School of Public Policy Publications. Substantially similar is defined as a non-subscription, open-access publication outlet with a similar mandate/vision and intended audience.
2.3 Should the Author publish or distribute the Work elsewhere at any time or in any alternate format, the Author agrees to contact The School of Public Policy Publications to inform them of the subsequent publication.
2.4 Should the Author publish or distribute the Work elsewhere at any time or in any alternate format, the Author agrees to make reasonable efforts to ensure that any such additional publication cites the publication in The School of Public Policy Publications by author, title, and publisher, through a tagline, author bibliography, or similar means. A sample acknowledgement would be:
“Reprinted with permission from the author. Originally published in the The School of Public Policy Publications, http://www.policyschool.ca/publications/.”
Section 3: Editing and Formatting
The Author authorizes the Publisher to edit the Work and to make such modifications as are technically necessary or desirable to exercise the rights in Section 1 in differing media and formats. The Publisher will make no material modification to the content of the Work without the Author’s consent.
Section 4: Author’s Ownership of Copyright and Reservation of Rights
4.1 Nothing in this agreement constitutes a transfer of the copyright by the Author, and the copyright in the Work is subject to the rights granted by this agreement.
4.2 The Author retains the following rights, including but not limited to, the right:
4.2.1 To reproduce and distribute the Work, and to authorize others to reproduce and distribute the Work, in any format;
4.2.2 To post a version of the Work in an institutional repository or the Author’s personal or departmental web page so long as The School of Public Policy Publications is cited as the source of first publication of the Work (see sample acknowledgement above).
4.2.3 To include the Work, in whole or in part, in another work, subject to Section 2 above and provided that The School of Public Policy Publications is cited as the source of first publication of the Work (see sample acknowledgement above).
4.3 The Editors and Editorial Board of The School of Public Policy Publications requires authors to publish the Work under a Creative Commons Attribution-NonCommercial 4.0 International licence (CC BY-NC 4.0). This license allows others to distribute, remix, tweak, and build upon the Work for noncommercial purposes, and ensures the Author is credited for the original creation. This onward licensing is subject to section 2.4 of this agreement, which further ensures that the original publisher is credited.
Section 5: Author’s Warranties and Undertakings
The Author warrants that:
5.1 The Author is the sole author of the Work, or if a joint author, the Author has identified within the Work the other authors, and holds the copyright, either solely or jointly, and has the power to convey the rights granted in this agreement.
5.2 The Work has not previously been published, in whole or in part, except as follows:
5.3 Any textual, graphic or multimedia material included in the Work that is the property or work of another is either explicitly identified by source and cited in the Work or is otherwise identified as follows:
5.4 To the best of the Author’s knowledge, the Work does not contain matter that is obscene, libelous, or defamatory; it does not violate another’s civil right, right of privacy, right of publicity, or other legal right; and it is otherwise not unlawful.
5.5 To the best of the Author’s knowledge, the Work does not infringe the copyright or other intellectual property or literary rights of another.
5.6 The Author will indemnify and hold Publisher harmless against loss, damages, expenses, awards, and judgments arising from breach of any such warranties.
Section 6: The Reuse of Third-Party Works
The Publisher requires that the Author determine, prior to publication, whether it is necessary to obtain permissions from any third party who holds rights with respect to any photographs, illustrations, drawings, text, or any other material (“third-party work”) to be published with or in connection with your Work. Copyright permission will not be necessary if the use is determined to be fair dealing, if the work is in the public domain, or if the rights-holder has granted a Creative Commons or other licence. If either the Author or Publisher determines for any reason that permission is required to include any thirdparty work, the Author will obtain written permission from the rightsholder.
